Table of Contents
Advertisement
Service Conditions
1.
Any entry of RT, TK, UCD Controlling Station, and Message Number that has not been assigned
results in Reorder Tone (ROT) connection.
The values that each parameter can take fall into the ranges:
RT:
TK:
Message Number: 01 - 58
2.
The maximum recording length is 60 sec (30 sec in the case of UCD).
3.
This feature is not effective for trunks being dubbed or placed in busy.
4.
A station user cannot record a message to a trunk in which a recording/dubbing is being made.
5.
When a station user encounters Digital Announcement Trunk-All Busy, after dialing RT/TK/UCD
Controlling Station Number/Message Number from the terminal, the station user hears a Busy
Tone.
6.
After completion of dialing RT/TK/UCD Controlling Station Number/Message Number, a station
user hears the Service Set Tone. In this instance, if the designated trunk is making a dub or being
dubbed, the dubbing is stopped. When the station user goes on-hook during the Service Set
Tone, the dubbing is also stopped.
7.
A message is recorded in the following sequence. As illustrated below, 1.5 sec after the Service
Set Tone and 1 sec before going on-hook are not recorded.
SST
8.
When the system encounters a busy trunk in an attempt to make a dubbing of the message to
the remaining trunks, the trunk is retried after a 16 second interval. Each trunk is attempted a
maximum of 16 times. If the final attempt is rejected because of busy, the system does not make
a dubbing to the trunk any more.
9.
Only the portion in which a message has been recorded is played back.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Multi Channel Recording - DAT
001 - 999
000 - 255
REC STARTS
SST
NO TONE
1.5
sec
EXECUTION
OF DUBBING
16
sec
(BUSY)
(BUSY)
RETRY #1
MESSAGE
16
sec
(BUSY)
(BUSY)
RETRY #2
REC ENDS
NO TONE
1.5
sec
16
sec
(BUSY)
RETRY #16
M-48
Page 365
Advertisement
Table of Contents
