Call Return - NEC NEAX 2400 ICS Features Manual

C-151
C-151
General Description
This feature allows the D
call to that number by simple operation. Two types of saving features are available:
Automatic Saving: The received calling number is automatically saved when the station rings. The
•
• Manual Saving:
Operating Procedure
Automatic Saving
1. Saving Calling Number
a.) A call is terminated to an analog station or My Line of the D
b.) The received calling number is automatically saved. When the station is the D
the Call Return key, the received calling number is displayed on the LCD and the Call
Return key lights red.
Note:
The maximum number of calling numbers stored for the D
term
D :
Analog station:
2. Displaying Stored Calling Number (for the D
a.) While in idle state, press the Call Return key.
b.) The saved calling number is displayed for 5 seconds. When multiple numbers are
stored, the display changes each time the Call Return key is pressed. When the
indication reaches the last number, the first number appears again by pressing the Call
Return key.
3. Call Origination
When using the Call Return key on the D
•
a.) Display the desired number by pressing the Call Return key. (Refer to (2b).)
b.) Lift the handset and receive Dial Tone.
c.) Press the Call Return key. The displayed number is dialed.
Note:
The dialed number is automatically deleted. When all the stored numbers are deleted, the Call Return key
goes off.
• When using Access Code
a.) Lift the handset and receive Dial Tone.
b.) Dial the access code for Call Return. The last number saved is dialed.
Note:
The dialed number is not deleted.
Page 186
(Series 6300 software feature)
term
or an analog station to save the received calling number and to originate a
stored number can be dialed by pressing the feature key or dialing the access
code. In the case of terminating the My Line of a D
RETURN key, the last three calling numbers can be automatically saved.
The received calling number is manually saved by the D
the SAVE AND REPEAT key while in conversation. The stored number can be
dialed by pressing the feature key.
3
1

Call Return

Call Return
term
/analog station is as follows:
term
with the Call Return key)
term
NEAX2400 ICS Business Features and Specifications
term
which has the CALL
term
user by pressing
term
.
term
NDA-24143, Issue 4
with