Table of Contents
Advertisement
H-2
General Description
This feature allows selected stations to reach the ATTENDANT CONSOLE [A-1] by going off-hook.
Operating Procedure
To reach the ATTENDANT CONSOLE [A-1]:
1.
The HOUSE PHONE user lifts the handset. The Attendant is called automatically.
2.
The Attendant answers.
3.
The Attendant connects the user to the desired station or trunk.
Service Conditions
1.
Attendant Console indications will appear as follows:
a.) ATND lamps flash
b.) Console buzzer sounds.
2.
HOUSE PHONES may be equipped with or without dials.
3.
HOUSE PHONE assignments are programmed into System Data via the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18].
4.
There is no limit to the number of HOUSE PHONES permitted in the system.
Interactions
1.
The AHLS command is not needed. When a station is programmed as TEC: 14, HOTLINE, it will
automatically be connected to the Attendant Console.
2.
If the House Phone is to be used for outgoing calls via the Attendant Console (ARSC command
RRI 2), assign a Route Restriction Class that will allow these connections. The same
consideration should be made for Incoming calls via the Attendant Console (RRI 0).
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
House Phone
House Phone
H-2
Page 263
Advertisement
Table of Contents
