NEC NEAX 2400 ICS Features Manual page 114

C-1D
Service Conditions (cont'd)
OFF-HOOK QUEUING
OUTGOING TRUNK QUEUING
12. A delay timer can be set in system programming, on a system-wide basis. This allows a station
to which CALL BACK has been set to initiate another call within a predetermined time period
after becoming idle, before the CALL BACK feature is activated. The delay timer can be set in
multiples of 2 seconds, up to a maximum of 14 seconds.
Page 84
term
Call Back - D
[O-7]
[O-2, O-2D]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4