Call Waiting - Originating - NEC NEAX 2400 ICS Features Manual

C-31
General Description
This feature provides selected stations with Camp-On capability to a busy internal station.
Operating Procedure
To activate CALL WAITING - ORIGINATING:
1. Dial the desired station number; receive Busy Tone.
2. Switchhook flash, receive Special Dial Tone, and dial the CALL WAITING - ORIGINATING code;
or press the "CW" key on the D
3. Receive Call Waiting Ringback Tone. Call Waiting Tone (3 beeps) is sent to the busy station.
1. Dial the CALL WAITING - ORIGINATING access code; receive Dial Tone.
2. Dial the desired station number.
3. If the called station is busy, CALL WAITING - ORIGINATING is automatically set; receive Call
Waiting Ringback Tone. Call Waiting Tone (3 beeps) will be sent to the busy station.
To answer a CALL WAITING - ORIGINATING call:
1. Call Waiting Tone is heard during a call in progress.
2. Switchhook flash, or press the "ANS" key on the D
3. The CALL WAITING - ORIGINATING call is automatically connected.
4. Another switchhook flash or pressing of the "ANS" key can be used to return to the original call,
and the second call will be held.
1. Call Waiting Tone is heard during the call in progress.
2. The called station hangs up; priority ringing is sent.
3. Lift the handset to answer.
Service Conditions
1. Once CALL WAITING - ORIGINATING is activated to a given station, other stations attempting
CALL WAITING - ORIGINATING to this station will receive Reorder Tone.
2. Call Waiting Tone is 3 bursts, 200 ms ON and 200 ms System Data. The repetition rate can be
programmed in System Data.
3. Periodic Call Waiting Tone can be eliminated by System Data programming on a per-tenant
basis.
4. The ability to activate this feature must be assigned in the call originators CLASS OF SERVICE
- INDIVIDUAL [C-15] programming.
5. CLASS OF SERVICE - INDIVIDUAL [C-15] for the called station must be programmed for CALL
WAITING - TERMINATING [C-12].
6. There is no limit to the number of stations that may access this feature simultaneously.
7. CALL WAITING - ORIGINATING is denied when the called station is connected to the
ATTENDANT CONSOLE [A-3].
8. CALL WAITING - ORIGINATING can be set only if the called station is busy on a two-party call
with another station or trunk.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Call Waiting - Originating

Call Waiting - Originating
term
.
OR
OR
term
to hold the existing call.
C-31
Page 163