Off-Hook Alarm - NEC NEAX 2400 ICS Features Manual

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

O-6
O-6
General Description
This feature allows a station user to call the Attendant or a predetermined station by simply staying OFF-
HOOK. The calling number is automatically displayed at the ATTENDANT CONSOLE [A-3] or a D
series with a display.
Operating Procedure
To operate:
1.
Lift the handset and stay off-hook.
2.
After a predetermined time elapses (2 to 30 sec.), the call will terminate at the ATTENDANT
CONSOLE [A-3] or the predetermined station.
3.
The calling station number will be displayed at the ATTENDANT CONSOLE [A-3] or D
answered.
Service Conditions
1.
Predetermined timing interval is programmable through the MAINTENANCE ADMINISTRATION
TERMINAL [M-18] (MAT) (2 to 30 seconds).
2.
In the night mode, an OFF-HOOK ALARM call directed to the ATTENDANT CONSOLE [A-3] will
not terminate at the ATTENDANT NIGHT TRANSFER [A-19] predetermined night station. The
caller will receive a Reorder Tone.
3.
A station will be assigned as a member of an OFF-HOOK ALARM group and will be connected
to the predetermined stations that are assigned for each off-hook group.
4.
Maximum number of OFF-HOOK ALARM groups is 7 per-TENANT [T-12] group. A group
number must be assigned to all the stations to be included in a group.
5.
The station assigned as a terminating station of each OFF-HOOK ALARM group can be a
member of a HUNTING GROUP [S-7, 8, 9].
6.
This service is programmed via System Data. Stations may be restricted from using this feature
in CLASS OF SERVICE - INDIVIDUAL [C-15].
7.
The ATTENDANT CONSOLE [A-3] can answer by pressing "EMG" key, which must be assigned
by the MAT [M-18]. Using the "ANSWER" key will not give priority to the OFF-HOOK ALARM call.
8.
The predetermined target station can set CALL FORWARDING - ALL CALLS [C-5] and CALL
FORWARDING - BUSY LINE [C-2].
9.
When the predetermined station is busy, the OFF-HOOK ALARM call receives Ringback Tone
until the station becomes idle.
10. This feature cannot be applied while in CONSULTATION HOLD - ALL CALLS [C-17] or CALL
HOLD [C-6] mode.
11. When an OFF-HOOK ALARM call is directed to a Pilot station of a UCD [U-1] group, queuing is
not available when all the stations within the group are busy.
Page 388

Off-Hook Alarm

Off-Hook Alarm
NEAX2400 ICS Business Features and Specifications
term
term
when
NDA-24143, Issue 4

Advertisement

Table of Contents
loading

Table of Contents