Table of Contents
Advertisement
Service Conditions (cont'd)
8.
The type of Paging service provided on a system basis is programmed via the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18] into the System database.
9.
A Page waiting to be answered is automatically cancelled after a predetermined programmed
duration. See VARIABLE TIMING PARAMETERS
10. Loop signaling is the recommended signaling type.
a.) Both MEET-ME PAGING and PAGING ACCESS [P-1] (loudspeaker - basic) can be
provided in the same system.
b.) A separate access code for MEET-ME PAGING and PAGING ACCESS [P-1] is required
for the same paging zone.
c.) A paging answer code is required for each MEET-ME PAGING zone.
d.) The maximum number of answer back ports is limited to the number of paging zones (20
maximum). These answerback ports are used for RADIO PAGING [R-16] service also.
e.) ALL ZONE PAGING [A-53] cannot be used with MEET-ME PAGING.
f.) Paging over the loudspeaker system is limited to paging from a station, an ATTENDANT
CONSOLE [A-3] or a TIE trunk. Callers on outside CO trunks must make arrangements
with an Attendant or a station user to have paging performed.
g.) Direct access (key) to paging from the ATTENDANT CONSOLE [A-3] is not available.
h.) The Attendant cannot dial the paging answer codes.
11. CALL TRANSFER - ALL CALLS [C-11]: A station user can flash and place a second party on
hold, hear Special Dial Tone, and dial the paging access code. The Paging Transfer (and use of
loudspeaker paging system with a party on hold) is allowed, unless denied by the Class of
Service of the station user's line.
12. Central Office trunks and Tie Line Trunks are used as interface circuits to the Paging equipment.
13. BUSY VERIFICATION [B-3]: Busy Verification is denied on a station line that is connected to
paging equipment. Attempts to busy-verify a station line will result in the Attendant hearing
Reorder Tone.
14. ATTENDANT-CONTROLLED CONFERENCE [A-2]: When a conference call is established, an
Attendant cannot connect the conference connection to paging loudspeakers.
15. CALL WAITING [C-12, 31]: A call is not allowed to wait on a line that has accessed loudspeaker
paging (making a page). The station user hears Reorder Tone.
16. EXECUTIVE RIGHT-OF-WAY [E-1] is denied to a station line connected to loudspeaker paging.
The station user receives Reorder Tone.
17. ATTENDANT CAMP-ON [A-1] is not allowed on a line that has accessed loudspeaker paging.
The station user receives Reorder Tone.
18. THREE-WAY CALLING [T-2] is not allowed after the paged party has been connected to the
originating station.
19. There are two methods of answer back operation: Delayed or Non-Delayed operation can be
selected for the system.
a.) Delayed Operation: The paging party goes on-hook to wait for the paged party to answer
back.
b.) Non Delayed Operation: The paging party remains off-hook to wait for the paged party to
answer back.
20. The paging trunk remains in a busy state, while the paging party remains unanswered (e.g., the
paging answer code has not been dialed). The paging answer back state will be cancelled after
a programmable time-out period, if the answer code is not dialed within the prescribed interval,
releasing the paging trunk and the paging party as well, if still in the off-hook mode.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Meet-Me Paging - Attendant
[V-1]
feature for selectable timing choices.
M-11
Page 315
Advertisement
Table of Contents
