Table of Contents
Advertisement
D-87
D-87
General Description
This feature gives multiple D
intercom group, regardless of their idle or busy status. An intercom group member can override another
intercom station in a two-party intercom connection. This service is referred to as an Intercom Bridge.
Operating Procedure
To originate a DIAL INTERCOM call:
1.
The intercom station presses the DICM key and goes off-hook within five seconds.
2.
Dial the desired INTERCOM station number; receive Ringback Tone. The calling D
term
D
Series E
3.
The desired INTERCOM station answers the call and is connected to the calling station.
To answer a DIAL INTERCOM call:
1.
The DICM key will flash, indicating an incoming DIAL INTERCOM call. The called station may
also hear distinctive three-burst ringing. The called D
term
D
Series E
2.
If the called station is already engaged in a conversation with a non-intercom call, the station may
press the HLD key and answer the DIAL INTERCOM call by pressing the DICM key. Ringing will
stop.
To bridge into a DIAL INTERCOM call:
1.
When two stations are engaged in a DIAL INTERCOM call, a third station, belonging to the same
DIAL INTERCOM group, presses the DICM key and goes off-hook. The called and calling D
display:
Page 218
Dial Intercom
Dial Intercom
term
station users the ability to simultaneously call any other member of the
ICM
(Time Display)
ICM
(Time Display)
ICM
(Time Display)
ICM
(Time Display)
OVR
(Time Display)
Called Intercom Number
XX
XX
term
displays:
Called Intercom Number
XX
XX
Intercom Number
XX
NEAX2400 ICS Business Features and Specifications
term
displays:
term
s
NDA-24143, Issue 4
Advertisement
Table of Contents
