NEC NEAX 2400 ICS Features Manual page 100

B-8
Service Conditions (cont'd)
5. This feature is not restricted by CLASS OF SERVICE - INDIVIDUAL [C-15] on either the boss or
secretary stations.
6. BOSS-SECRETARY MW LAMP CONTROL indication is cleared by system initialization or a
Local Processor initialization.
7. MW control is provided to stations using the D
a.) one station is talking with another station.
b.) a special purpose button is pushed after a call is established.
c.) the station is calling another station in the network.
d.) CALL WAITING [C-12, 13] is being set up.
e.) the station is using VOICE CALL - D
f.) the ATTENDANT CONSOLE [A-3] indication shows an incoming call.
8. MW for one station of the network can be controlled from the ATTENDANT CONSOLE [A-3] and
any other station at the same time. The controlled station cannot identify the controlling party.
9. The MW indication on the boss' station appears as follows:
Type of Station Set
D
Page 70
Boss - Secretary - Message Waiting Lamp Control
term
Series III
term
D Series E
term
sub-line when:
term
[V-2D].
Message Waiting Indication
Display shows:
MW
Display shows:
MW
NEAX2400 ICS Business Features and Specifications
(Time Display)
(Time Display)
NDA-24143, Issue 4