Call Forwarding - Override - NEC NEAX 2400 ICS Features Manual

C-26
General Description
This feature allows a target station user (Station A) to call the station (Station B) which has set CALL
FORWARDING - ALL CALLS [C-5] to it. If the called station (Station B) has set the CALL
FORWARDING - BUSY LINE [C-2] to the calling station (Station A), the calling station (Station A) hears
Busy Tone and can activate CALL BACK [C-1], EXECUTIVE RIGHT-OF-WAY [E-1], or CALL
WAITING - ORIGINATING [C-31].
Operating Procedure
No manual operation is require.
Service Conditions
1. This service feature is allowed to all stations in the NEAX2400 ICS, except the ATTENDANT
CONSOLE [A-3]. The Attendant can use BV.
2. Any station that has set CALL FORWARDING - ALL CALLS [C-5] can activate any feature, if the
station is allowed the feature via CLASS OF SERVICE [C-15].
(Series 6300 software enhancement) When this feature is activated, the D
3.
as shown below:
Station A
(4567)
Station B
(4501)
term
Note: The D Series E displays TRANSFER, other D
4. (Series 6300 software enhancement) When Station "A" (D
Station "A" places an incoming call into HOLD condition and calls Station "B", each D
displays as shown in the following illustrations:
Note: These displays are available only when Station "B" has set CALL FORWARDING - ALL CALLS [C-11].
Station A
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Call Forwarding - Override

Call Forwarding - Override
XFR 4501
(Note)
Transferring
Station
XFR
(Note)
Dialed Number
FWD XXXX
(Time Display)
Transferred
Station
4501
Indicates Station B has been set Call
Forwarding - All Calls to Station A.
Transferred
Station
4501 4567
Indicates Station B has been set
Call Forwarding - All Calls to
Station A.
term
s display XFR in this space.
Called Station
XXXX
term
LCD displays
term
) calls Station "B" (D
C-26
term
), or if
term
LCD
Page 153