Table of Contents
Advertisement
T-62
General Description
This feature allows a station user to set a Timed Reminder call from the station. The system calls up the
station at the designated time. When the station answers the call, the station user hears a message or
Music-On-Hold.
Operating Procedure
To set a Timed Reminder call:
1.
Lift a handset; receive Dial Tone.
2.
Dial the "Timed Reminder (SET)" access code.
Designate your desired time by dialing 4 digits. (Ex. 16:30 → 1630)
3.
4.
Hear SST or a recorded message which indicates the Timed Reminder call has been set.
5.
Hang up.
To cancel a preset Timed Reminder call:
1.
Lift the hand set; receive Dial Tone.
2.
Dial the "Timed Reminder (CNCL)" access code.
3.
Hear SST or a recorded message which indicates the Timed Reminder call has been canceled.
4.
Hang up.
To answer a Timed Reminder call:
1.
A station which has been set Timed Reminder starts ringing at the predetermined time.
2.
Lift the handset.
3.
Hear Music-On-Hold or a recorded message which indicates this call is a Timed Reminder call.
4.
Hang up.
Service Conditions
1.
In the following cases, the station user attempting to set/cancel this service receives Reorder
Tone:
a.) when the SFI = 41 of the service class is 0,
b.) when CALL FORWARDING – ALL CALLS [C-5] is set.
2.
The wake-up times are to be set at five-minute intervals. For example, if the user dials 1004, the
wake-up time will be set at 10:00 a.m.
3.
500 stations per Local Processor can be set for a single wake-up period. If the 500 stations
maximum is exceeded, the system will automatically set the wake-up time five minutes earlier
(to the maximum of 75 minutes).
4.
The wake-up time entered latest has the priority over the ones entered previously.
5.
The no answer timer for the wake-up call is 30 seconds. After the no answer timer expires, no
retry is performed.
6.
If the link block, etc. occurs while being recalled, no retry is performed.
7.
When the station is busy or lockout while being recalled, the station is recalled three minutes
after. This retry is repeated three times.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Timed Reminder
Timed Reminder
(Series 6100 software feature)
T-62
Page 527
Advertisement
Table of Contents
