NEC NEAX 2400 ICS Features Manual page 521

Operating Procedure (cont'd)
To set SPLIT CALL FORWARDING using D
To set Call Forwarding from an individual station (D
1. Setting Call Forwarding for an incoming call from a station:
a.) Confirm that the PAGE* (One-touch changeover) lamp is on; if the lamp is off, turn the
lamp on by pressing the PAGE key.
b.) Lift the handset or press the SPKR key; receive Dial Tone.
c.) Press the FWD, FWD-BY, or FWD-DA key; receive Special Dial Tone.
d.) Dial the number of the desired target station; receive Service Set Tone. The following is
displayed on the LCD, when the destination is a station:
term
D Series E
When the destination is an ATTENDANT CONSOLE, the D
term
D Series E
When the destination is an outside trunk, The D
term
D Series E
Also, the FWD, FWD-BY, or FWD-DA lamp turns on.
e.) Replace the handset or press the SPKR key.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Split Call Forwarding
term
FWD SET
(Time Display)
FORWARD SET
(Time Display)
FWD SET OPR
(Time Display)
FORWARD SET OPR
(Time Display)
FWD SET
(Time Display)
FORWARD SET
(Time Display)
feature key:
term
):
XXXXX
XXXXX
term
term
displays:
displays:
Page 491
S-99