Table of Contents
Advertisement
M-23
Message Waiting Lamp Setting - Attendant
General Description
This feature permits an ATTENDANT CONSOLE [A-3] to set or cancel a Message Waiting indication on
a station provided with this feature.
Operating Procedure
To set a Message Waiting indication:
1.
Press an idle loop key.
2.
Dial the Message Waiting set code (up to 3 digits); receive Special Dial Tone.
3.
Dial the station number; receive Service Set Tone.
4.
Message Waiting indication is set.
5.
Press the "RLS" key to return to an idle condition.
To cancel a Message Waiting indication:
1.
Press an idle loop key.
2.
Dial the Message Waiting cancel code (up to 3 digits); receive Special Dial Tone.
3.
Dial the station number; receive Service Set Tone.
4.
Message Waiting indication is cancelled.
5.
Press the "RLS" key to return to an idle condition.
Service Conditions
1.
The Message Waiting lamp on a single line telephone or a D
activated.
2.
When Message Waiting is set to a 16-button or 24-button D
indicates:
term
D
Series E
3.
Message Waiting cannot be set when the ATTENDANT CONSOLE [A-3] is in a consultation
condition with a station or trunk.
4.
An Attendant attempting to set Message Waiting to a station where Message Waiting has
previously been set, will receive Busy Tone.
5.
In a MULTIPLE CONSOLE OPERATION [M-4], if Message Waiting is set by one ATTENDANT
CONSOLE [A-3], it can be cancelled by another.
6.
Message Waiting indications are cleared when the system is initialized.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Message Waiting Lamp Setting - Attendant
(Time Display)
(Time Display)
term
will be lit when this feature is
term
station, the LCD display
MW
MW
M-23
Page 327
Advertisement
Table of Contents
