Table of Contents
Advertisement
Operating Procedure (cont'd)
3.
The LCD displays:
term
D
Series E
Note:
*An entered abbreviated number is translated into the forwarding number and the first eight digits are
displayed.
To cancel CALL FORWARDING - BUSY LINE - OUTSIDE from a multi-line D
1.
Press the multi-line key of the station to which CALL FORWARDING - BUSY LINE-OUTSIDE is
to be cancelled.
2.
Lift the handset or press the "SPKR" key; receive Dial Tone.
3.
Press the CALL FORWARDING - BUSY LINE - OUTSIDE feature key; receive Service Set Tone.
The LED of the associated feature key will go out. The LCD displays;
term
D
Series E
4.
Replace the handset or press the "SPKR" key.
Service Conditions
1.
CALL FORWARDING - BUSY LINE - OUTSIDE may be set or cancelled by either a station user
or the ATTENDANT CONSOLE [A-3].
2.
Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in System Data.
3.
CALL FORWARDING - BUSY LINE - OUTSIDE data remains in the data memory, even if the
system is reinitialized or in the event of a power failure.
4.
A maximum of 12 digits, including trunk access code, can be stored.
5.
For CALL FORWARDING - BUSY LINE - OUTSIDE, Speed Call List numbers may be
programmed as the destination telephone number. This permits the sent digits to exceed the 12-
digit maximum.
6.
When using this feature, either the calling station or the forwarding station is recorded by SMDR
[S-10] as the originating station of calls forwarded. The selection between the above stations is
determined through System Data.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Forwarding - Busy Line - Outside
Target Number*
FWD SET
(Time Display)
FORWARD SET
(Time Display)
FWD CNCL
(Time Display)
FORWARD CANCEL
(Time Display)
XXXXXXXX
XXXXXXXX
term
:
XXXXXXXX
XXXXXXXX
C-60
Page 169
Advertisement
Table of Contents
