Table of Contents
Advertisement
S-6
General Description
This feature allows any NEAX2400 ICS station to establish a conference. The conference may be any
combination of stations and/or trunks (inside and outside parties).
Operating Procedure
Procedure 1 (MEET-ME CONFERENCE):
1.
Station user wishing to establish the conference (conference leader) calls each party desired
and advises them of the conference.
2.
All stations then call the conference station number, and the conference leader calls the special
conference number for the leader.
3.
Conference connection is automatic.
4.
The conference leader may dial "0" to lock out additional parties.
5.
If the conference leader connected to the conference circuit dials digit "#", all conferees will be
disconnected. Otherwise, the conference is terminated only after all parties have hung up.
6.
To release from a conference circuit individually, a station user merely hangs up. The remaining
conferees may continue without interruption.
Procedure 2:
1.
Conference leader dials the conference station number on the conference; conference circuit
automatically answers.
2.
The conference leader makes a Switch Hook Flash (SHF).
3.
The conference leader dials the station number of conferee; receive Ringback Tone.
4.
The conferee answers.
5.
The conference leader hangs up; the conferee is connected to the conference circuit (port 1).
6.
The conference leader sequentially calls all desired parties (up to 7 parties) and connects them
to the other conference circuits (port 2 to 7).
7.
The conference leader may dial "0" to lock out additional parties.
8.
If the conference leader connected to the conference circuit dials digit "#", all conferees will be
disconnected. Otherwise, the conference is terminated only after all parties have hung up.
9.
To release from a conference circuit individually, a station user merely hangs up. The remaining
conferees may continue without interruption.
Service Conditions
1.
The station connected to port 0 of the PA-CFTB becomes the conference leader.
2.
While the conference unit provides for amplification, the condition of Central Office connections
will affect conference transmission.
3.
Each conference unit provides up to an 8-party conference.
4.
Conference unit extension numbers should be placed in a STATION HUNTING [S-7, 8, 9] group
with only the pilot numbers published.
5.
Override services, such as, BUSY VERIFICATION [B-3], ATTENDANT OVERRIDE [A-7], or
EXECUTIVE RIGHT-OF-WAY [E-1] are denied on a conference call.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Station-Controlled Conference
Station-Controlled Conference
S-6
Page 455
Advertisement
Table of Contents
