Table of Contents
Advertisement
S-21
S-21
General Description
This feature allows a station user to dial certain frequently-called exchange network numbers using fewer
digits (abbreviated call codes) than normally required. Using this feature, a station user can establish his
own abbreviated codes.
Operating Procedure
To operate:
1.
Lift handset or press "SPKR" key; receive Dial Tone.
2.
Dial the SPEED CALLING access code (one or two digits).
3.
Dial the abbreviated call code (one or two digits); call is completed.
To set, using the Master Station only:
1.
Lift handset; receive Dial Tone.
2.
Dial the SPEED CALLING feature access code.
3.
Dial the abbreviated call code (one or two digits). At this point no tone is returned.
4.
Dial the outgoing number. Include the route access code. A brief pause will occur before
receiving Service Set Tone.
term
To operate from a D
1.
Press "LNR/SPD" key; receive Dial Tone. The LCD displays:
term
D
Series E
2.
Press the desired call code; the call is completed.
Service Conditions
1.
SPEED CALLING-STATION codes are programmed into RAM memory per Local Processor.
2.
Each abbreviated call code can store a maximum of 24 digits, including access codes and
pauses.
3.
A maximum of 100 stations per Module Group can be equipped with SPEED CALLING-
STATION.
4.
100 memory blocks per Module Group are assigned for speed calling. A maximum of 10
numbers can be stored in each memory block. This allows for a total of 1000 numbers per
Module Group.
5.
Each station can be assigned 10 memory blocks for speed calling; therefore, it can be
programmed for 100 numbers maximum.
Page 474
Speed Calling - Station
Speed Calling - Station
:
LNR [*] / SPEED [_ _]
(Time Display)
LNR [*] / SPEED [_ _]
(Time Display)
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
