Table of Contents
Advertisement
Service Conditions (cont'd)
11. Terminal Attribute Assignment through the MAT and the terminal can be done simultaneously.
The latest entered attributes are registered in the terminal's memory.
12. The One-Touch Speed Call Memory Data of the D
up by using commands BOSD, DOSD and LOSD. The date shown on BOSD is the date of the
MAT, not the date of the PBX.
13. (Series 6300 software enhancement) Following traffic data can be either printed out on the
printer or output to the MAT hard disk. The traffic data field in the hard disk will be copied to the
floppy disk.
a.) calls per station
b.) calls per route
c.) station peg count
d.) Attendant Console peg count
e.) route peg count
14. (Series 6300 software enhancement) The history of MAT usage can be output to the printer or
MAT printer by entering the USER NAME and ID CODE when using, depending on the System
Data. This feature is called Audit Trail to Track the MAT Usage.
15. (Series 6300 software enhancement) When Audit Trail to Track the MAT Usage is used:
a.) A maximum of 15 USER NAMEs can be assigned.
b.) The maximum digits of the USER NAME is 16, and those of the ID CODE is 8.
c.) The USER NAME and ID CODE can be assigned using figures (0-9) and alphabets (A-
Z).
d.) A maximum of 128 System Messages can be stored. However, if other failure messages
are output, the stored number for Audit Trail to Track the MAT Usage service will
decrease.
e.) If more than 128 System Messages are output, the exceeded messages will not be
stored.
f.) When a System Message is printed out, that information remains as OLD information.
16. (Series 6300 software enhancement) If wrong ID CODEs are entered several times assigned
by System Data, the I/O port used for the corresponding MAT will be locked out. This feature is
called Lock Out Maintenance Port.
17. (Series 6300 software enhancement) When Lock Out Maintenance Port service is used:
a.) A maximum of 15 USER NAMEs can be assigned.
b.) The maximum digits of the USER NAME is 16, and those of the ID CODE is 8.
c.) Lock Out information is output with the information of the USER NAME, date, time, and
IOC port used as System Message.
d.) A maximum of 128 System Messages can be stored. However, if other failure messages
are output, the stored number for Audit Trail to Track the MAT Usage service will
decrease.
e.) If more than 128 System Messages are output, the exceeded messages will not be
stored.
f.) When a System Message is printed out, that information remains as OLD information.
Interactions
1.
APSW must be assigned before allowing the password function in the ASYD command. If
password is allowed in ASYD, before APSW is assigned, error message 0550, the PASSWORD
NOT YET ASSIGNED will be displayed.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Maintenance Administration Terminal (MAT)
term
can be backed up, displayed and listed
M-18
Page 319
Advertisement
Table of Contents
