Table of Contents
Advertisement
F-31
F-31
General Description
This feature allows individual station data of a terminal to be exchanged with another without the
assistance of MAT. The result of the exchange is printed out in the system message. The exchange of
terminal data by this service is called SWAP service.
The following information is included in the system message:
a.) Successful activation: station data change notice
b.) Unsuccessful activation: station data change notice and error code to indicate the
restricted condition.
Operating Procedure
To operate: (To swap the station data of Station A (202) for Station B (209), operating from Station A)
1.
Go off-hook; receive Dial Tone.
2.
Dial the Swap service access code; receive Special Dial Tone. The LCD displays:
term
D
Series E
3.
Dial the Station Bus number (209); receive Service Set Tone. The LCD displays:
term
D
Series E
4.
Replace the handset; the service will be activated.
When the service is restricted, the user hears Reorder Tone after dialing the target station
number. The LCD displays:
term
D
Series E
Page 256
Follow Phone
Follow Phone
SWAP
(Time Display)
SWAP
(Time Display)
SWAP OK
(Time Display)
SWAP OK
(Time Display)
Flashing
RST
(Time Display)
REST
(Time Display)
209
209
209
209
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
