Table of Contents
Advertisement
I-2
I-2
General Description
This feature allows an ATTENDANT CONSOLE [A-3] to visually identify the type of service and/or trunk
group that is arriving or waiting to be answered.
Operating Procedure
No manual operation is required.
Service Conditions
1.
A flashing lamp indicates a call waiting to be answered.
2.
A steady lamp indicates an answered call.
3.
A maximum of 12 lamp and key groups can be associated with INCOMING CALL
IDENTIFICATION.
4.
Lamps and keys may be assigned as follows:
LDN:
WATS:
FX:
ATND:
RCL:
ICPT:
NANS:
BUSY:
TIE:
5.
More than one INCOMING CALL IDENTIFICATION lamp can be duplicated at the ATTENDANT
CONSOLE [A-3]. The Attendant can select any incoming call by pressing the associated key.
6.
Calls can be answered via the "ANS" key for first-in, first-out priority. (CALL QUEUING [C-9]).
7.
ATTENDANT CONSOLEs [A-3] are limited to 12 unique INCOMING CALL IDENTIFICATION
indications. However, more than one incoming trunk group can be programmed for the same
INCOMING CALL IDENTIFICATION.
TF:
CAS:
PR1:
PR2:
PR3:
SC/RC:
EMG:
Interactions
1.
Step 1 is not required to fulfill the requirements of the feature description. The CALL WAITING
LAMP [C-13] should be programmed in relationship to the INCOMING CALL IDENTIFICATION.
2.
System Data 2, Index 8, Bits 6 and 7, and Index 9, Bits 0-3 can be flagged to represent an
incoming call, but the meaning of the incoming call can be re-assigned via the AAKP command.
3.
The first six keys (LDN to CCSA) are fixed and cannot be changed. The AAKP command is used
to program the remaining six optional keys.
Page 268
Incoming Call Identification
Incoming Call Identification
Listed Directory Number (Central Office)
Wide Area Telephone Service
Foreign Exchange
Attendant Call
Attendant Recall Calls
Call Forwarding - Intercept
Call Forwarding - Don't Answer
Call Forwarding - Busy Line
Tie Line
Inter-Position Transfer
Centralized Attendant Access
Priority Call 1
Priority Call 2
Priority Call 3
Serial Call Recall Key
Off-Hook Alarm
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
