Analog Caller Id - Station - NEC NEAX 2400 ICS Features Manual

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

A-127
General Description
This feature allows a called station to receive CALLER ID information (time, calling number and name)
from Central Office when a call terminates via the analog COT. The calling number received from the
ISDN network, MF-ANI information received from Central Office with the MF feature or the calling station
number within the PBX can change into CALLER ID information and be sent to the called station.
Operating Procedure
No manual operation is required.
Service Conditions
1.
This feature is available for Series 6200 software or later.
2.
This service is provided for analog stations.
3.
Message types of CALLER ID information sent to a called station are as follows:
04H: Calling Number Delivery Information (for Calling number)
80H: Call Setup (for Calling number and name, or reason not to inform.)
4.
When a call terminates via another station, the number of intermediate station will be sent. After
that station hangs up, the number of the originating party will not be sent: CALLER ID of the first
termination is only sent.
5.
If a calling number exceeds 10 digits, the first or last exceeded digits will be deleted according
to system data.
6.
This service is not provided if a call does not terminate directly on a line: in the case of
termination using such services as Call Pickup, Executive Right of Way.
7.
This service is not provided when a calling party is the Attendant Console.
8.
This service is not provided for single line telephones.
9.
This service is not available in boss-secretary service.
10. The first ringing upon termination is 2-second ring and 4-second silence. A ringer pattern is
provided from the second ringing.
11. The following firmware must be equipped on the circuit cards:
Circuit Card
PA-8COTBJ
PA-8LCBR
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Analog Caller ID - Station

Analog Caller ID - Station
(Series 6200 software feature)
Firmware
SW-317 8COTBJ PROG-A
SP-1122 CALL-ID PROG-A
SP-3190 8COTBJ PROG-A
SW-331 8LCBR PROG-A
SP-3207 8LCBR PROG-A
SP-1123 CALL-LC PROG-A
A-127
Page 59

Advertisement

Table of Contents
loading

Table of Contents