Table of Contents
Advertisement
G-2
G-2
General Description
This feature allows a station user to dial certain frequently called stations within an NEAX2400 ICS group
using an easily remembered number. The same number can be assigned to different user groups. The
group call can initiate CALL WAITING - ORIGINATING [C-31] to a busy station.
Operating Procedure
To initiate a group call:
1.
Lift the handset; receive Dial Tone.
2.
Dial the GROUP CALLING access code (maximum of 3 digits) plus the GROUP CALLING
Station Code (1 or 2 digits).
3.
The call is completed.
To initiate a group call from a D
1.
LNR/SPD key, plus GROUP CALLING station code (1 or 2 digits).
2.
Call is completed.
Service Conditions
1.
Each master station equipped in a calling group will program the GROUP CALLING numbers
through their telephone.
2.
GROUP CALLING data is retained in memory, even in the event of power failure, by means of
Hard Drive Backup via BKUPI command.
3.
The memory for GROUP CALLING is shared with SPEED CALLING - STATION [S-21] or
GROUP [S-23].
4.
A group for GROUP CALLING is identical to that of a SPEED CALLING - GROUP [S-23].
5.
The number of groups per Module Group for GROUP CALLING and SPEED CALLING
STATION/GROUP [S-21, 23] is limited to the following:
GROUP CALLING Station Code:
6.
The number of stations that can be called per group can be set within the following limit:
a.) Number of Groups x Number of Station Codes = Less than 1,000
b.) The number of stations per group is assigned in multiples of 10
7.
For more information, refer to SPEED-CALLING GROUP [S-23].
8.
A station using GROUP CALLING must be allowed individual SPEED CALLING STATION [S-
21] and CALL WAITING - ORIGINATING [C-31] service.
9.
CALL WAITING - ORIGINATING [C-31] service can be set when the called station is busy. CALL
WAITING - ORIGINATING [C-31] will not be activated under the following conditions:
a.) DO NOT DISTURB (DND) [D-11D] is set to the called station.
b.) DATA LINE PRIVACY is set to the called station.
c.) The called station is connected to the ATTENDANT CONSOLE [A-3].
d.) The called station is in a THREE-WAY CALLING [T-2] condition.
e.) CALL BACK [C-1], CAMP-ON [A-1] or CALL WAITING - ORIGINATING [C-31] service is
set to the called station.
Page 260
Group Calling
Group Calling
term
:
1 digit (X)
2 digits (XX)
Maximum 100 Groups
Maximum 10 Groups
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
