Table of Contents
Advertisement
Interactions (cont'd)
2.
MEET-ME PAGING is limited to stations and Attendant Consoles. CO trunks, TIE LINE ACCESS
[T-3], or REMOTE ACCESS TO PBX SYSTEM [R-2] calls must have the Attendant Console or
station user perform the paging operation.
3.
The Attendant Console cannot dial the MEET-ME PAGING answer codes
4.
BUSY VERIFICATION [B-3] and EXECUTIVE OVERRIDE [E-1]: These features will be denied
for a connection that includes the Paging route.
5.
DELAY OPERATION: Station A is connected to party B. Station A momentarily presses the
switchhook and dials the MEET-ME PAGE route access code. When connected to the page,
Station A requests Station C to dial the MEET-ME PAGE answer code. Station A hangs up.
When Station C dials the answer code, Station A is rung. Station C and Station A are
connected. If Station A hangs up, Party B is connected to Station C. If Station A momentarily
presses the switchhook, all three parties are connected together in a THREE-WAY CALLING
[T-2] connection. If Station C does not call the MEET-ME PAGE answer code after 30
seconds, Party B rings back to Station A.
6.
NON-DELAY OPERATION: Station A is connected to Party B. Station A momentarily presses
the switchhook and dials the MEET-ME PAGE route access code. When connected to the page,
Station A requests Station C to dial the MEET-ME PAGE answer code. Station A stays on the
trunk and is still voice-connected to the paging equipment. Station C dials the MEET-ME PAGE
answer code. The paging trunk becomes idle. Station A is connected to Station C. If Station A
hangs up, Party B is connected to Station C. If Station A momentarily presses the switchhook,
all three parties are connected together in a THREE-WAY CALLING [T-2] connection. There is
no time-out period if Station C does not dial the MEET-ME PAGE answer code. Station A may
press the switchhook to disconnect the page trunk and reconnect to Party B. If desired, Station
A may hang up and Station A will be recalled by Party B.
7.
Stations allowed Priority Page, SFI = 57, will come into the paging route, except when the
Attendant Console is paging.
8.
To answer MEET-ME PAGE, while connected to another party, CALL HOLD [C-6] must be used.
THREE-WAY CALLING [T-2] is not allowed.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Meet-Me Paging
M-1
Page 307
Advertisement
Table of Contents
