Consecutive Dialing - Attendant - NEC NEAX 2400 ICS Features Manual

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

C-33
C-33
General Description
This feature gives the ATTENDANT CONSOLE [A-3] the ability to generate DTMF signals while engaged
in a station/trunk connection. These DTMF signals are generated via the dial key pad of the ATTENDANT
CONSOLE [A-3].
Operating Procedure
No manual operation is required.
Service Conditions
1.
The ATTENDANT CONSOLE [A-3] can transmit DTMF signals under the following conditions:
a.) When the ATTENDANT CONSOLE [A-3] originates a trunk call while an internal station
is holding, DTMF signals can be transmitted to the trunk or station but not to both in a
three-way connection.
b.) When the ATTENDANT CONSOLE [A-3] originates a trunk call while another trunk call
is on hold, DTMF signals can be transmitted to either trunk but not to both in a three-way
connection.
c.) When the ATTENDANT CONSOLE [A-3] originates an internal station call while holding
a station or trunk, DTMF signals can be transmitted to either station or trunk but not to
both in a three-way connection.
d.) When the ATTENDANT CONSOLE [A-3] originates/answers an internal station or trunk
call and remains engaged in the connection. If the "START" key is pressed, DTMF
signals cannot be transmitted from the ATTENDANT CONSOLE [A-3] (even when DTMF
signal sending is selected in the System Data).
2.
All digits (DTMF signals) generated by the ATTENDANT CONSOLE [A-3] will not appear on the
ATTENDANT CONSOLE [A-3] display.
3.
Additional digits can be dialed after the trunk soft-hold timer has timed out or after the trunk
answer signal has been received.
4.
If the ATTENDANT CONSOLE [A-3] overrides a connection between a station/trunk and a
station/trunk, the ATTENDANT CONSOLE [A-3] may generate DTMF signals.
5.
After answering any of the following calls: the Attendant can send DTMF signal to the calling
party by pressing key pad while connected with the call; or the Attendant can hold the answered
call and transfer it to a specific destination. Either function can be selected through the System
Data.
Ring-down
Individual Attendant Call
Recall
OFF-HOOK ALARM [O-6]
PRIORITY CALL [P-9]
HOUSE PHONE [H-2] (Hot Line)
6.
If the Attendant answers an incoming call transferred from one ATTENDANT CONSOLE to
another, by INTER-POSITION TRANSFER [I-5], DTMF signals cannot be generated from the
ATTENDANT CONSOLE on which the transferred call has been answered.
Page 166

Consecutive Dialing - Attendant

Consecutive Dialing - Attendant
Operator call
Listed Directory Number
CALL FORWARDING [C-2, 3, 5] to Attendant
CALL FORWARDING - INTERCEPT [C-25] to Attendant
CCIS Incoming Call
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Advertisement

Table of Contents
loading

Table of Contents