NEC NEAX 2400 ICS Features Manual page 260

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

D-114
Service Conditions (cont'd)
g.) incoming calls via CCIS / tie line
h.) TAS incoming calls.
13. This service is not available for incoming calls to an individual Attendant.
14. This service is not activated for the attendant of Night Connection-Fixed [N-1] or Flexible [N-2].
15. The message is sent only once. If the Attendant does not answer by the end of the message, the
caller will be disconnected from the announcement trunk automatically, and will hear MUSIC ON
HOLD [M-7].
16. CALL QUEUING [C-9] and CALL WAITING LAMP [C-13] services are available when this
service is activated.
17. The calling party cannot receive the message if the restriction between the incoming trunk and
the announcement trunk is not cleared.
18. When this service is allowed in the system data, ATTENDANT OVERFLOW [A-10] cannot be
activated.
19. When the external announcement machine is used, the announcement starts from the time
when the PBX acknowledges the announcement trunk answer and ends at the time of the
announcement trunk release.
Page 230
Delay Announcement - Attendant
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Advertisement

Table of Contents
loading

Table of Contents