NEC NEAX 2400 ICS Features Manual page 288

F-31
Service Conditions (cont'd)
7. The following information is swapped when this service is activated:
Item Data Swapped in FOLLOW PHONE Service
1
2
3
4
5 Intercom information (Automatic, Manual, Dial)
6
7
8
9
10
11
Legend: X = Available
Note 1: The Add-On Module key information of D
Note 2: There are some hardware/firmware limitations in order to swap all the Speed Calling key information. The
Speed Calling key assigned in the function keys does not swap.
Note 3: When the pilot station of the hunting group swaps, the function as pilot station swaps at the same time.
8. When this service is activated, the key information of D
multi-line will be changed automatically. Example:
Station A
- My Line
Station A
-My-line
-Multi-line
9. If the multi-line LED of D
immediately after the service is activated. The LED light normally after the station user goes on-
hook.
Page 258
Function key information
Add-On Module key information (Note 1)
Flexible line/feature key information
Speed Calling - One Touch data (Note 2)
Station Number
Route Restriction Class
Service Class
Speed Calling - Group/Station data
Phantom Number
Name Display information
-- = Not available
200
202
203
term
is lit (busy) when the station swaps, the line LED key may not light
Follow Phone
term
does not swap.
term
Station B
-My Line 202
-My Line 203
Station B
-My-line 200
NEAX2400 ICS Business Features and Specifications
Station Type
Single Line
--
--
--
--
--
X
X
X
X
X
X
, which has the target station as a
Station C
-My-line
-Multi-line
Station C
-My-line
-Multi-line
NDA-24143, Issue 4
term
D
X
X
X
X
X
X
X
X
X
X
X
203
202
203
200