Table of Contents
Advertisement
R-2
General Description
This feature allows a user outside the NEAX2400 ICS to access the system via an exchange network
connection without Attendant or station assistance. The outside user may originate calls over any or all
of the PBX facilities, such as, WATS, FX, TIE Line, or CCSA.
(Series 6300 software enhancement) When a wrong code is received from a station/trunk, detailed
information on the unauthorized user is output as System Message. This feature is called Toll Fraud
Report.
Operating Procedure
To operate, using AUTHORIZATION CODE [A-20]/FORCED ACCOUNT CODE [F-7]:
1.
Lift the handset; receive Dial Tone.
2.
Dial the Remote Access number to connect to the NEAX2400 ICS; receive Ringback Tone
through public network.
3.
If there is an announcement service, an announcement will be heard; receive Dial Tone.
4.
Dial the AUTHORIZATION CODE/FORCED ACCOUNT CODE; receive PBX Dial Tone.
5.
Dial the desired station number; hear Ringback Tone.
6.
The called party answers.
To operate without using AUTHORIZATION CODE [A-20]/FORCED ACCOUNT CODE [F-7]:
1.
Lift the handset; receive Dial Tone.
2.
Dial the Remote Access number to connect to the NEAX2400 ICS; receive Ringback Tone
through the public network.
3.
Receive PBX Dial Tone.
4.
Dial the desired station number; hear Ringback Tone.
5.
The called party answers.
Service Conditions
1.
When a call terminates from a TIE Line, this feature is available by dialing a specific station
number.
2.
After a call terminates to AUTOMATED ATTENDANT [A-82], AUTHORIZATION CODE [A-20]
and FORCED ACCOUNT CODE [F-7] services are available.
3.
AUTHORIZATION CODE [A-20] is predetermined on a system basis. Refer to
AUTHORIZATION CODE
4.
Announcement service is not provided when AUTHORIZATION CODE [A-20] service is not
available.
5.
Until the call is connected to an announcement trunk, Ringback Tone is heard.
6.
Announcement trunks are to be used for single connections only. Announcement service is not
available when the announcement trunks are all busy or are not provided. (The caller receives
PBX Dial Tone.)
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Remote Access to System
Remote Access to System
[A-20]
for more information.
R-2
Page 429
Advertisement
Table of Contents
