M-85D Message Waiting Indication - D Term - NEC NEAX 2400 ICS Features Manual

M-85D
General Description
This feature allows Message Waiting (MW) information to be displayed on the lower line (16 digits) of the
LCD.
term
Note: The D (multifunction terminal) must be equipped with a 2 or 3 line LCD display.
Operating Procedure
No manual operation is required.
Service Conditions
1. The LCD displays the following information, when MESSAGE WAITING INDICATION - D
activated:
Initial Display
(Time Display)
When controlled by
MCI, Attendant or
station
term
D Series E
2. When this service is assigned to a D
display remains unchanged.
3. This service can be controlled via MAT command program.
4. This service is available only when OAI service is not available (SYS1, INDEX=79, b6=1). When
OAI service is available (SYS1, INDEX=79, b6=0), the information cannot be displayed on the
lower line of LCD, but will be displayed on the upper line.
5. While Message Waiting information control is being executed to a D
LCD by this service, time information is not displayed on the LCD. When Message Waiting
information control is cancelled, the time information display is resumed.
6. This service is not provided for a D
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Message Waiting Indication - D
Message Waiting Indication - D
0 0: 0 0
0 0: 0 0
term
term
term
AM MON 01
MW
AM MON 01
MW
with a 1-line LCD, the service is not available, and the
equipped with 1-line LCD.
M-85D
term
term
term
equipped with a 2-line
Page 369
is