D-32D Dual Hold - D Term - NEC NEAX 2400 ICS Features Manual

D-32D
D-32D
General Description
This feature allows two D
or originate a call from a subline appearance or the idle prime line.
Operating Procedure
To place a call in a DUAL HOLD-D
1. When two D
place the other D
term
2. If the held D
term
held D user presses the pre-assigned HLD key and places the connection in a DUAL HOLD-
term
D condition.
To answer a call in a DUAL-HOLD-D
term
1. The D user goes off-hook and presses the held line.
term
2. D A hears MUSIC ON HOLD [M-7] if D
term
3. D A comes back to the original call if D
Service Conditions
1. The DUAL HOLD - D
between any two D
2. While a call is being held, Automatic Recall is initiated after a preprogrammed time on the D
that placed the call on Hold.
3. For STATION MESSAGE DETAIL RECORDING SYSTEM [S-10] information between
extensions, a call is regarded as completed when the "HLD" key is pressed to hold the call. When
both stations answer the held call, it is processed as a new call.
4. Even in the case of a call between two D
Boss and Secretary after the Boss/Secretary service, or between overriding and overridden
parties after the PRIVACY RELEASE [P-18] service.
5. This feature is not restricted by the Class of Service for the stations in the network.
6. The following services are available to either the holding line or the line placed on hold when a
call is held by pressing the HLD key in a DUAL HOLD - D
CALL BACK
MESSAGE REMINDER
7. The following services are not available to either the holding line or the held line in a DUAL HOLD
term
- D situation:
ATTENDANT CAMP-ON WITH TONE INDICATION [A-1]
BUSY VERIFICATION
CALL WAITING - ORIGINATING
CALL WAITING - TERMINATING
EXECUTIVE RIGHT-OF-WAY
PRIVACY RELEASE
Page 216
Dual Hold - D
Dual Hold - D
term
s to simultaneously be placed on hold. This allows the held parties to answer
term
condition:
term
s are connected, either D
term
on hold.
user wishes to originate or answer another call from a sub-line appearance, the
term
condition:
term
feature can be activated by pressing the "HLD" key during a call
term
s.
term
term
term
user can press the pre-assigned HLD key and
term
B is still holding the call.
term
B has already returned to the original call.
term
s, DUAL HOLD - D
term
situation:
[C-1]
[M-19D]
[B-3]
[C-31]
[C-12]
[E-1D]
[P-18]
NEAX2400 ICS Business Features and Specifications
term
cannot be initiated between
NDA-24143, Issue 4
term