Table of Contents
Advertisement
Operating Procedure (cont'd)
term
6.
Called D
's LCD displays:
term
D
Series E
To cancel CALL BACK:
1.
Lift the handset or press the "SPKR" key; receive Dial Tone.
2.
Press the "CALL BACK" key; receive Service Set Tone. Call Back is cancelled.
3.
The LCD displays:
term
D
Series E
Service Conditions
1.
If CALL BACK is not answered within 30 seconds, ringing will stop and CALL BACK will be
automatically cancelled.
2.
CALL BACK may be assigned via CLASS OF SERVICE - INDIVIDUAL [C-15].
3.
CALL BACK to a busy station cannot be established if that station is in the LINE LOCKOUT
[L-3] mode.
4.
There is no time limit for CALL BACK. Once activated, it will remain in status memory until
completed or manually cancelled.
5.
CALL BACK cannot be activated to more than one station at a time. (Calling party).
6.
CALL BACK cannot be set by more than one station at a time. (Called party).
7.
A station cannot use CALL BACK and OUTGOING TRUNK QUEUING [O-2] at the same time.
8.
When the calling station is called back, STATION HUNTING [S-7, 8, 9] and CALL PICKUP
[C-7] programming will be ignored.
9.
There is no limit to the number of stations that may access this feature simultaneously.
10. CALL BACK can only be activated from MY Line of a D
11. CALL BACK cannot be established to a busy station when the station is engaged in any of the
following:
ATTENDANT CAMP-ON WITH TONE INDICATION
CALL HOLD
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Back - D
Calling Station
CB
(Time Display)
CB
(Time Display)
CB CNCL
(Time Display)
CB CANCEL
(Time Display)
term
XXXX
XXXX
term
.
[A-1]
[C-6, C-6D]
C-1D
Page 83
Advertisement
Table of Contents
