Table of Contents
Advertisement
M-47
General Description
This feature permits D
intercom SIGNAL key (SIG key) is operational at all times. An Intercom call is not required. If the signalled
station is ringing from another call, the manual intercom signal will interrupt that ringing.
Operating Procedure
Press the "SIG" key; send a one-second ring to the predetermined station.
Service Conditions
1.
When MANUAL SIGNALING is initiated by a station user, this one-second ring takes priority over
any other incoming call indications from the multi-line appearances.
term
2.
Only D
can be assigned a manual SIG key.
3.
One destination station can be assigned for manual signaling through the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18].
4.
Stations that can signal each other must be assigned in the same Module Group.
5.
A station can manually signal one other D
6.
MANUAL SIGNALING is an operation of MANUAL INTERCOM [A-30] and is used independently
of the MANUAL INTERCOM [A-30] feature.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Manual Signaling
Manual Signaling
term
station users to send a one-second ring to a predetermined station. The manual
term
.
M-47
Page 351
Advertisement
Table of Contents
