Table of Contents
Advertisement
L-6D
Operating Procedure (cont'd)
term
D
Series E
Service Conditions
1.
Maximum 5 destinations can be stored.
2.
The maximum digits of the destination is 32 digits.
3.
When a function key has been assigned as "Last Number Called", the function key also works
as the LINE/SPD key.
4.
This feature is also effective when the calling party presses the LINE/SPD key while the SPKR
key is being pressed.
5.
When the LINE/SPD key is pressed, # or the LINE/SPD key must be pressed within 12 sec.
Otherwise, the calling party hears Busy Tone.
6.
The calling party can enter abbreviated codes after pressing the LINE/SPD key.
7.
Any number entry (other than #) from a D
abbreviated code(s) (1 or 2 digits) of SPEED CALLING -STATION.
term
8.
A D
can display the upper 16 digits among the stored 32 digits.
9.
When any destination has not been stored in the system, which occurs after initialization of the
circuit card, the D
term
D
Series E
term
10. When a D
newly dialed destination is stored in the following manner:
Stack# 1
Stack# 2
Stack# 3
Stack# 4
Stack# 5
Previously stored destinations
11. The number dialed during the call can be stored as the LAST NUMBER CALL - stock redial with
a maximum of 32 digits.
Page 292
Last Number Called - D
10:24
term
displays no destination as shown below.
LNR [#] / SPD [ ] - 1
LNR [*] / SPD [_ _ _] - 1
MIC
FDB
user dials the same destination that has already been stored in the system, the
No.
82625191
No.
40001
No.
982111
No.
25000
No.
303
Stack Memory
term
82625191
AM
FRI
15
term
after pressing the LINE/SPD key is recognized as
FDN
No.
25000
newly dialed numbers
removed
NEAX2400 ICS Business Features and Specifications
blank
blank
>>>
newly stored
No.
25000
Stack# 1
Stack# 2
No.
82625191
Stack# 3
No.
40001
No.
982111
Stack# 4
No.
Stack# 5
Stack Memory
Newly stored destinations
NDA-24143, Issue 4
303
Advertisement
Table of Contents
