Table of Contents
Advertisement
Service Conditions (cont'd)
4.
For CALL FORWARDING - DON'T ANSWER - OUTSIDE, Speed Call List numbers may be
programmed as the destination telephone number. This permits the sent digits to exceed the 8-
digit maximum.
5.
When using this feature, the forwarding station is recorded by SMDR [S-10] as the originating
station of calls forwarded. (See ASYD System Data 1, Index 20, Bit 7).
6.
CALL FORWARDING - DON'T ANSWER - OUTSIDE can be restricted by the RSC of the
originating station.
7.
Route PEG COUNT [P-7] is used for CALL FORWARDING - DON'T ANSWER - OUTSIDE.
Every time CALL FORWARDING - DON'T ANSWER is set or cancelled, it is counted in the
service PEG count.
8.
This feature can be restricted according to the D
CALL FORWARDING - DON'T ANSWER - OUTSIDE calls to the D
transferred if the service restriction class of the D
term
D
MY Line Service
Restriction Class
Non-Restricted
Restricted
9.
Restriction for outgoing connection by CALL FORWARDING - DON'T ANSWER - OUTSIDE are
as follows:
a.) When originating a call from a station: Route Restriction data assignment is verified
when CALL FORWARDING - DON'T ANSWER service is in effect.
b.) When originating a call from a trunk: Restriction for tandem connections between the
incoming trunk and the outgoing trunk selected for the call where CALL FORWARDING -
DON'T ANSWER service occurs.
10. There is no limit to the number of stations that may activate this feature simultaneously.
11. When the called station does not answer for a predetermined time interval, this feature is applied
according to the Route Restriction Class of the originating station and the trunk used in Call
Forwarding. When restricted by Route Restriction Class, CALL FORWARDING - DON'T
ANSWER - OUTSIDE is not activated, and the called station continues to ring.
12. Call Transfer - Attendant: When the called station does not answer for a predetermined time
interval, calls which have been transferred by the Attendant are assigned to this feature
according to their Route Restriction Class. When calls are restricted by Route Restriction Class,
this feature is not activated, and the called station continues to ring.
13. When Attendant transfers a call to a station that has set CALL FORWARDING - DON'T
ANSWER - OUTSIDE, TOLL DENIAL/TOLL DIVERSION [T-6] is not activated.
14. When a caller places a call via OGCA (Outgoing Call Alternative) and when the first outgoing
route and the calling party are restricted, this service cannot be set. In this case, the service can
be set via the following procedure:
a.) assign a dummy route,
b.) clear the restriction between the dummy route and all the stations,
c.) assign the dummy route as the first route of OGCA.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Forwarding - Don't Answer - Outside
term
D
Multi-Line
Service Restriction
Class
Non-Restricted
Restricted
Non-Restricted
Restricted
term
MY Line service restriction class. Incoming
term
MY Line restricts this feature.
Activation from D
Multi-Line
Possible
Not Possible
C-74
term
multi-line cannot be
term
Remarks
Page 177
Advertisement
Table of Contents
