Table of Contents
Advertisement
A-60
A-60
General Description
This feature permits an Attendant, via an ATTENDANT CONSOLE [A-3], to access a non-specific free
Attendant by dialing the operator access code, and to call a particular ATTENDANT CONSOLE [A-3] by
dialing an individual Attendant Identification Number.
Operating Procedure
To operate:
1.
Press an idle loop key.
2.
Dial the individual Attendant Identification Number or operator call code.
Service Conditions
1.
An Attendant Identification Number must be published for each Attendant.
2.
ATTENDANT NIGHT TRANSFER [A-19] cannot be activated for calls via this feature.
3.
The operator call code should be a 1-digit number. Normally, 0 is assigned as the operator call
code.
4.
No operation keys on the called Attendant Console can be used while performing ATTENDANT-
TO-ATTENDANT CALLING.
5.
Only the "CNCL" key on the calling ATTENDANT CONSOLE [A-3] can be used to disconnect
ATTENDANT-TO-ATTENDANT CALLING.
6.
An Attendant can receive only one ATTENDANT-TO-ATTENDANT CALL at a time. An
INCOMING CALL IDENTIFICATION (ICI) [I-2] key can be designated for receipt of these calls:
a.) TF: Inter-Position Transferred Call
b.) ATTENDANT-TO-ATTENDANT CALL
7.
An Attendant cannot extend ATTENDANT-TO-ATTENDANT CALL to any other destination.
Page 40
Attendant-To-Attendant Calling
Attendant-To-Attendant Calling
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
