Table of Contents
Advertisement
B-18
General Description
This feature allows two Class Marks (described below) to be assigned to stations, enabling such services
as Voice Mail, announcement machine, etc. depending on the Class Mark.
1.
A Class Mark which allows No Answer timer to be extended when the Blind Transferred-to
station does not answer within the predetermined period of time interval.
2.
A Class Mark which activates CALL FORWARDING - DON'T ANSWER [C-3] set to the Blind
Transferred-to station when CALL FORWARDING - DON'T ANSWER is available.
Operating Procedure
To transfer a call in progress:
1.
While connected to another party (station or trunk), the station user presses switchhook or "XFR"
term
key on D
; receives Special Dial Tone.
2.
Station user dials the third station; receives Ringback Tone. If the station user remains on the
line, the transferred party hears MUSIC ON HOLD [M-7].
3.
At this point, the station user can hang up before the third station answers; the transferred party
hears Ringback Tone.
Service Conditions
1.
This feature is allowed only when a station is engaged in a two party connection (station or
trunk).
2.
Samples of connection patterns available under BLIND TRANSFER service are as follows:
a.) Station A blind-transfers incoming trunk/station to Station B.
b.) Station A blind-transfers incoming trunk/station call to the Attendant.
c.) Station A blind-transfers incoming trunk/station call to Station B, which has set CALL
FORWARDING-DON'T ANSWER to Station C (the call is forwarded to Station C).
d.) Station A blind-transfers incoming trunk/station call to Station B, which has set CALL
FORWARDING-DON'T ANSWER trunk (the call is forwarded to outside station).
3.
The Class Mark that extends No Answer timer must be the same as the one used for BLIND
TRANSFER TO ATTENDANT [B-17]. This Class Mark is assigned to the transferring station.
4.
Depending on System Data assignment, the following conditions occur (when CALL
FORWARDING - DON'T ANSWER feature is set on the Blind Transferred-to station):
a.) the transferring station is recalled.
b.) the transferred-to station rings continuously.
c.) the call is forwarded when the CALL FORWARDING - DON'T ANSWER timer expires.
5.
If the destination station for Blind Transfer has set CALL FORWARDING - DON'T ANSWER
[C-3] to a station/trunk, Call Forwarding is activated when a predetermined No Answer timer
expires.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Blind Transfer To Station
Blind Transfer To Station
B-18
Page 79
Advertisement
Table of Contents
