Table of Contents
Advertisement
Service Conditions (cont'd)
13. Port traffic and station PEG COUNT [P-7] reports will not record the use of the INTERCOM
feature.
14. Dedicated function keys on the D
Speaker (SPKR) key can be used for hands-free operation.
Interactions
1.
The Recall key will not operate on an INTERCOM call.
2.
THREE-WAY CALLING [T-6] must first be provided.
3.
The AICD Command must be assigned before the AKYD command.
4.
When assigning the PRI parameter in AKYD, the following data selections are available.
Priority PRI
0
1
3
3
4
5.
No programming is required to enable the SIG key to remain active at all times.
6.
The SIG key, when pressed by a calling station, will interrupt other ringing signals at the called
station.
7.
Hands-Free operation is available with AUTOMATIC/MANUAL INTERCOM. When an incoming
call terminates to a station, by pressing the SPKR key, the line seized is based on the PRI
assignment of the AKYD command.
8.
MANUAL SIGNALING [M-47] will not operate if the DATA key has been pressed.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Automatic/Manual Intercom
term
cannot be used while on an INTERCOM call. Only the
1
Prime Line
Dial Intercom
Automatic Intercom
Manual Intercom
Automatic Intercom
2
-
Prime Line
Prime Line
Prime Line
Manual Intercom
A-30
3
-
-
-
-
Prime Line
Page 35
Advertisement
Table of Contents
