Co/Pbx Dialing Options - NEC DT510 User Manual

To return to your original call:
(1) Press the Voice Over key.
Note: Your Voice Over key flashes red when you are
talking to your original call.

CO/PBX Dialing Options

Save Number Dialed
To save the outside number you just dialed (up to 24
digits).
Note: Use this feature before hanging up.
(1) Press the Save Number Dialed key (Service
Code 751:30).
To redial a saved number:
(1) Press an idle trunk line key.
Note: This selects a specific trunk for the call.
(2) Press the Save Number Dialed key (Service
Code 751:30).
PREVIEW
List Dir
Note: The stored number dials out.
-OR-
(1) Press the Speaker key.
SAVED NUMBER
ICM Prog
(2) Dial 715.
Note: Save Number Dialed automatically selects a
trunk from the same group as your original call.
Note: The stored number dials out.
Memo Dial
To store a number while you are on a call:
(1) While on a call, press the Memo Dial key
(Service Code 751:31).
(2) Dial the number you want to store.
(3) Press the Memo Dial key again and continue
with the conversation.
To call a stored Memo Dial number:
(1) Do not lift the handset.
(2) Press the Memo Dial key (Service Code 751:31).
(3) Press the Speaker key.
-OR-
(1) Press a configured Line key.
Note: The stored number dials out.
MEMO DIAL
CONF
17