Receiving Internal/All Call Page Selection - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
4-31 Receiving Internal/All Call Page
Selection
General Description
Use this Memory Block to specify per station whether or not an Internal Zone or
Internal All Zone Page is received.
Display
T e l
P o r t
N o . D a t a
~
N o .
( 0 1 C 0 )
0 1 / 3 1 : P A G I N G
T I M E
Settings
LK 1 LK 2
YS NO
Programming Procedures
1 Go off-line.
C A
2 Press LK4 +
3 Press LK2 to disable Internal Zone or Internal All Zone page for Tel Port No.
Use the following to enter data:
J
t o move the cursor left
L
t o move the cursor right
K I
~ t o enter numeric data or Tel Port No.
D
– OR –
B
to go to next assigned Tel Port No.
B A
+
B
B
+
C
G
+
4 Press to write the data and display the next Memory Block.
5 Program the next Memory Block or press
1. Internal Emergency All Call Page and Internal Paging by Tenant group override this Memory Block. Refer to
Memory Block 1-1-46 [Access Code (1-Digit) Assignment].
2. Telephone ports A0~C0 are ports 100~120.
___________________________________________________________________________________
2 - 540
S e t t i n g
T i t l e D a t a
Y S
D I S P L A Y
LK 3 LK 4
to access the Memory Block.
t o enter A for Port Numbers 100~109
t o enter B for Port Numbers 110~119
3 to enter C for Port Number 120
E
LK 5 LK 6
to go back on-line.
Notes
Telephone Mode
PC Programming
LK 7 LK 8 The shaded
selection is the
default.
Electra Elite IPK
4
Submode
—
Data No.
31
+BTT
Memory Blocks