Prime Line Selection - NEC SL2100 Features And Specifications Manual

Hide thumbs Also See for SL2100:

Table of Contents

Prime Line Selection allows a Multiline Terminal user to place or answer a call over a specific trunk by

just lifting the handset. The user does not have to first press keys or dial codes. This simplifies

handling calls on a frequently used trunk.

Prime Line Selection has the following two modes of operation:

• Outgoing Prime Line Preference

Lifting the handset seizes the Prime Line. Outgoing Prime Line Preference would help a

telemarketer who always needs a free line to call prospective clients. The telemarketer just lifts the

handset and the Prime Line is always available. (Outgoing Prime Line Preference may be affected

by Incoming Prime Line Preference - refer to the Programming section of this feature.)

• Incoming Prime Line Preference

When the Prime Line rings the extension, lifting the handset answers the call. Incoming Prime Line

Preference could benefit the Service Department dispatcher who must quickly answer customer's

service calls and then dispatch repair technicians. When a customer calls in, the dispatcher lifts the

handset to get their call. (Incoming Prime Line Preference can optionally seize an idle line

appearance - refer to the Programming section of this feature.)

• Prime Line Selection can be assigned for Single Line Terminals, however, the telephones cannot

access ICM dial tone.

• Prime Line Selection directly interacts with line preference.

Default Settings

System Availability

Required Component(s)

Related Features

Central Office Calls, Placing

Direct Inward Dialing (DID)

Direct Inward Line (DIL)

Direct Inward System Access (DISA)

Features and Specifications Manual

Prime Line Selection

Show Quick Links

Table of Contents