Programming The Ip Terminal For The Dial Pad And Line Key Kit - NEC UX5000 Hardware Manual

Chapter 4 - Terminals and Optional Equipment
3. Following the directions below for the type of dial pad installed.
4. Save to memory by pressing line key 2, 8, 14, or 20. The display changes back to the Service Class R/W
mode and the MW LED will be lit red.
5. Press Exit to return the terminal to idle condition.
4.3.4

Programming the IP Terminal for the Dial Pad and Line Key Kit

1. Enter the terminal's program mode by pressing HOLD CONF * #.
2. At the log-in screen, enter the user name (default: ADMIN) and password (default: 6633222) and press
the OK Soft Key.
3. Press Soft Key 3 for "Maintenance Setting".
4. Press Soft Key 4 for "Adjust".
5. Press Soft Key 2 for "Key Kit Type".
4 - 10
Dial Pad Type
Japanese
Model A Terminal
Model B UX5000 Terminal
Call Center
Hotel-1
Hotel-2
Retirement Home
Japan 32-Button
Japan Value
Model A Value
Model B Value
Reserve
Push LED Indication
0 1 Line 1 LED on Red
0 2 Line 2 LED on Red
0 3 Line 1 and 2 LED
on Red
0 4 Line 1 LED on
Green
0 5 Line 2 LED on
Green
0 6 Line 1 and 2 LED
on Green
0 7 Line 1 LED flashing
Red
0 8 Line 2 LED flashing
Red
0 9 Line 1 and 2 LED
flashing Red
1 0 Line 1 LED flashing
Green
1 1 Line 2 LED flashing
Green
1 2 Line 1 and 2
flashing Green
Chapter 4