Display Trapbuffer - H3C SR6600 Command Reference Manual

Examples
# Display the log file configuration.
<Sysname> display logfile summary
Log file is enabled.
Channel number : 9
Log file size quota : 10 MB
Log file directory : flash:/logfile
Writing frequency : 24 hour 0 min 10 sec
Table 48 Command output
Field
Log file is
Channel number
Log file size quota
Log file directory
Writing frequency

display trapbuffer

Use display trapbuffer to display the state and the trap information of the trap buffer. Without the size
buffersize argument, the command displays all trap information.
Syntax
display trapbuffer [ reverse ] [ size buffersize ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
reverse: Displays trap entries chronologically, with the most recent entry at the top. Without this keyword,
the command displays trap entries chronologically, with the oldest entry at the top.
size buffersize: Specifies the number of latest trap messages to be displayed, in the range of 1 to 1024.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the state and trap information of the trap buffer.
<Sysname> display trapbuffer
Trapping buffer configuration and contents:enabled
Description
State of the log file feature, enabled or disabled.
Log file channel number, which defaults to 9.
Maximum storage space of a log file.
Log file directory.
Log file writing frequency.
210