Driver Memory Settings - If Equipped; Programming The Memory Feature; Linking And Unlinking The Key Fob To Memory - Chrysler Pacifica 2021 Owner's Manual

30 GETTING TO KNOW YOUR VEHICLE
DRIVER MEMORY SETTINGS — IF EQUIPPED
This feature allows the driver to save up to two
different memory profiles for easy recall through a
memory switch. Each memory profile saves
desired position settings for the following features:
Driver's seat

Easy Entry/Exit seat operation (if equipped)

Power steering wheel position (if equipped)

Side mirrors (if equipped)

A set of desired radio station presets

NOTE:
Your vehicle is equipped with two key fobs, each

can be linked to either memory position 1 or 2.
If your vehicle is equipped with a Uconnect 5

radio, memory settings will be linked to the
driver profiles in the radio, in addition to several
other features (radio presets, home screens,
settings, navigation, phone, etc.)
The Driver Memory Settings switch is located on
the driver door, next to the door handle, and
consists of three buttons:
The set (S) button, which is used to activate the

memory save function.
The (1) and (2) buttons which are used to recall

either of two saved memory profiles.
1 — Memory Profile Button 1
2 — Memory Profile Button 2
3 — Set Button
P
ROGRAMMING
To create a new memory profile, perform the
following:
page 186.
Ú
NOTE:
Saving a new memory profile will erase the
selected profile from memory.
1. Place the vehicle's ignition in the ON/RUN
position (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., driver's seat, outside mirrors
and radio station presets).
Driver Memory Switch
T M F
HE EMORY EATURE
3. Push the set (S) button on the memory switch,
and then push the desired memory button
(1 or 2) within five seconds. The instrument
cluster display will show which memory
position has been set.
NOTE:
Memory profiles can be set without the vehicle in
PARK.
L A U T
INKING ND NLINKING
T M
O EMORY
Your key fob can be programmed to recall one of
two saved memory profiles.
NOTE:
Before programming your key fob you must select
the "Personal Settings Linked to Key Fob" feature
through the Uconnect Settings
Ú
To program your key fob, perform the following:
1. Place the vehicle's ignition in the OFF
position.
2. Select a desired memory profile 1 or 2.
3. Once the profile has been recalled, push and
release the set (S) button on the memory
switch.
K F
HE EY OB
page 186.