Mazda 2002 6 Workshop Manual page 563

Hide thumbs Also See for 2002 6:

Table of Contents

Boot Disassembly Note

• The wheel side boot does not need to be removed unless replacing it or the ball joint and shaft

• Do not strip the tape until the boot is assembled.

1. Wrap the shaft splines with tape.

2. Remove the boot.

ABS Sensor Rotor (With ABS) Disassembly Note

• Do not remove the sensor rotor unless it is necessary.

• Do not reuse the sensor rotor if removed.

1. Tap the ABS sensor rotor off the drive shaft using

Dynamic Damper Assembly Note

1. Install the dynamic damper as shown in the

Standard length

334.7—340.7 mm {13.2—13.4 in}

2. Install the new boot band onto the dynamic

Chapters

Table of Contents