Mazda 2002 6 Workshop Manual page 589

Hide thumbs Also See for 2002 6:

Table of Contents

Oil Seal Assembly Note

1. Apply grease to a new oil seal.

2. Press in the new oil seal using the SSTs.

Upper Bearing Assembly Note

1. Apply grease to a new upper bearing.

2. Press in the upper bearing using the SST.

Seal Ring Assembly Note

1. Install a new seal ring to the valve part of the pinion shaft using the SST.

2. After installing it, seat it properly using the SST.

3. Install the snap ring.

Adjusting Cover Assembly Note

1. Set the rack to the center position.

2. Tighten the adjusting cover to 4.9 N·m {50

kgf·cm, 36 in·lbf} three times, then return it 25°

using the SST.

3. Apply sealant to the threads of the locknut.

4. Attach the locknut.

ENGINE SPEED SENSING POWER STEERING

Chapters

Table of Contents