Trim; A-Pillar Trim Removal; A-Pillar Trim Installation - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

1. Turn the seaming welt over.

2. Disengage clips A using a fastener remover.

3. Pull the A-pillar trim, then disengage clip B (1).

4. Pull the A-pillar trim upward, then disengage clip

B from the A-pillar trim (2).

5. Pull clip B out, then rotate 45° .

6. Remove clip B from the grommet by pulling it

1. Cut A-pillar trim tab A to the same length as tab B.

2. Install clip B to the A-pillar trim.

3. Install the A-pillar trim by tapping the clip into the

TRIM

A6E774468160W01

A6E774468160W02

Table of Contents