Caliper (Front) Disassembly/Assembly - Mazda 2002 6 Workshop Manual

End Of Sie

CALIPER (FRONT) DISASSEMBLY/ASSEMBLY

1. Disassemble in the order indicated in the table.
1 Dust seal
2 Piston
(See P–22 Piston Disassembly
3 Piston seal
(See P–22 Piston Seal Disassembly
4 Bleeder cap
5 Bleeder screw
(See P–23 Bleeder Screw Assembly
6 Caliper body
7 Boot
2. Assemble in the reverse order of removal.
Piston Disassembly Note
Caution
• Blow the compressed air slowly to prevent the piston from suddenly popping out.
1. Place a piece of wood in the caliper, then blow
compressed air through the hole to force the
piston out of the caliper.
Piston Seal Disassembly Note
1. Remove the piston seal from the brake caliper
using the SST.
P–22
CONVENTIONAL BRAKE SYSTEM
Note)
Note)
Note)
A6E691233990W01
A6E6912W046
A6E6912W047
A6E6912W048