Automatic Transaxle Shift Mechanism; Shift-Lock Inspection; Key Interlock Inspection; Interlock Cable Inspection - Mazda 2002 6 Workshop Manual

AUTOMATIC TRANSAXLE SHIFT MECHANISM

AUTOMATIC TRANSAXLE SHIFT MECHANISM

SHIFT-LOCK INSPECTION

1. Turn the ignition switch to ON position.
2. Verify that the selector lever is in P position.
3. Depress the brake pedal and verify that the selector lever can be shifted from P position.
• If a malfunction is found, inspect the interlock cable.
(See K–45 INTERLOCK CABLE
End Of Sie

KEY INTERLOCK INSPECTION

1. Verify that the ignition key cannot be pulled out except in P position.
• If a malfunction is found, inspect the interlock cable. (See
End Of Sie

INTERLOCK CABLE INSPECTION

1. Turn the ignition switch to ON position (engine OFF).
2. Remove the clip of the selector lever base plate,
then remove the interlock cable from the U-
groove.
3. Remove the interlock cable from the selector
lever.
4. Verify that the interlock cable moves freely with
the brake pedal depressed.
• If there is any malfunction, replace the
interlock cable.
INSPECTION.)
K–45 INTERLOCK CABLE
A6E561630000W01
A6E561609000W01
INSPECTION.)
A6E561609000W02
A6E5616W011
A6E5616W010
INTERLOCK CABLE
BHE0514W009
K–45
K