Woofer Inspection; Noise Filter; Removal/Installation - Mazda 2002 6 Workshop Manual

5HB
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
1 Temporary spare tire cover
2 Wing bolt
3 Connector
4 Woofer
3. Install in the reverse order of removal.
End Of Sie

WOOFER INSPECTION

1. Inspect for continuity between the audio amplifier
connector terminals and woofer connector
terminals using an ohmmeter.
• If not as specified, replace the related wiring
harnesses.
2. Verify that there is battery positive voltage at the
woofer connector terminal A (4SD) or C (5HB)
using a voltmeter.
• If not as specified, replace the related wiring
haness.
3. Inspect continuity between the woofer connector
terminal B and body ground using an ohmmeter.
• If not as specified, replace the related wiring
harness.
• If as specified, replace the woofer.
End Of Sie
NOISE FILTER REMOVAL/INSTALLATION
Brake Light Noise Filter
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
1 Nut
2 Connector
3

Noise filter

3. Install in the reverse order of removal.
T–104
AUDIO AND NAVIGATION SYSTEM
A6E8124W024
A6E8124W006
A6E812466967W02
A6E8124W046
A6E812466869W01
A6E8124W008