Front Auto Leveling Sensor; Rear Auto Leveling Sensor Removal/Installation - Mazda 2002 6 Workshop Manual

FRONT AUTO LEVELING SENSOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Jack up the vehicle and remove the wheel and tire.
3. Remove in the order indicated in the table.
1 Connector
2 Bolt
3 Bracket
4

Front auto leveling sensor

4. Install in the reverse order of removal.
5. Adjust the headlight zeroset. (See
HEADLIGHT ZEROSET)
End Of Sie

REAR AUTO LEVELING SENSOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Jack up the vehicle.
3. Remove in the order indicated in the table.
1 Connector
2 Bolt
3 Rear auto leveling sensor
4. Install in the reverse order of removal.
5. Adjust the headlight zeroset. (See
HEADLIGHT ZEROSET)
End Of Sie
T–32
EXTERIOR LIGHTING SYSTEM
T–31
T–31
A6E811251030W06
A6E8112W165
A6E811251030W07
A6E8112W156