FUSE SERVICE CAUTION
Caution
• Determine and correct the cause of the burnt fuse before replacing it with the specified type. If the
fuse is replaced before doing this, it may burn again.
End Of Sie
MAIN FUSE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the main fuse block cover.
3. Remove in the order indicated in the table.
1
Nut
2
Bolt (See
T–19 Bolt Removal
3
Main fuse
4. Install in the reverse order of removal.
Bolt Removal Note
1. Press and remove the tabs on the main fuse
block at the positions indicated by the arrows.
2. Lift up the main fuse block and remove the bolts.
End Of Sie
POWER SYSTEM
POWER SYSTEM
Note)
A6E811066000W01
A6E811066761W01
A6E8110W108
T
A6E8110W119
A6E8110W120
T–19