Ashtray Illumination Bulb - Mazda 2002 6 Workshop Manual

DOOR SWITCH REMOVAL/INSTALLATION
Front
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
1 Screw
2 Door switch
3 Connector
3. Install in the reverse order of removal.
Rear
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
1 Screw
2 Door switch
3 Connector
3. Install in the reverse order of removal.
End Of Sie
DOOR SWITCH INSPECTION
1. Remove the door switch. (See
2. Inspect for continuity between the door switch
terminal and a body ground using an ohmmeter.
• If not as specified, replace the door switch.
End Of Sie
ASHTRAY ILLUMINATION BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the boot panel.
3. Remove in the order indicated in the table.
1 Socket
2

Ashtray illumination bulb

4. Install in the reverse order of removal.
T–52
INTERIOR LIGHTING SYSTEM
T–52 DOOR SWITCH REMOVAL/INSTALLATION)
A6E8114W122
A6E811466540W01
A6E8114W108
A6E8114W109
A6E811466540W02
A6E8114W115
A6E811455431W01
A6E8114W106